The viscosity index (VI) is an arbitrary, unitless measure of the change of viscosity with temperature, mostly used to characterize the viscosity-temperature behavior of lubricating oils. The lower the VI, the more the viscosity is affected by changes in temperature. The VI was originally measured on a scale from 0 to 100; however, advancements in lubrication science have led to the development of oils with much higher VIs.
The viscosity of a lubricant is closely related to its ability to reduce friction in solid body contacts. Generally, the least viscous lubricant which still forces the two moving surfaces apart to achieve "fluid bearing" conditions is desired. If the lubricant is too viscous, it will require a large amount of energy to move (as in honey); if it is too thin, the surfaces will come in contact and friction will increase.
Video Viscosity index
Relevance
Many lubricant applications require the lubricant to perform across a wide range of conditions, for example, automotive lubricants are required to reduce friction between engine components when the engine is started from cold (relative to the engine's operating temperatures) up to 200 °C or 392 °F when it is running. The best oils with the highest VI will remain stable and not vary much in viscosity over the temperature range. This allows for consistent engine performance within the normal working conditions. Historically, there were two different oil types, recommended for usage in different weather conditions. For winter use, the engines required motor oil with the viscosity rating 5, while for warm and hot season it had to be changed to oil with 30-40 viscosity rating. Later on, there appeared multi-grade motor oils, which contained polymers that made the oil film thinner at higher temperatures without thickening the oil.
Maps Viscosity index
Classification
The VI scale was set up by the Society of Automotive Engineers (SAE). The temperatures chosen arbitrarily for reference are 100 and 210 °F (38 and 99 °C). The original scale only stretched between 0 (lowest VI oil, naphthenic) and 100 (best oil, paraffinnic) but since the conception of the scale better oils have also been produced, leading to VIs greater than 100 (see below).
VI improving additives and higher quality base oils are widely used nowadays which increase the VIs attainable beyond the value of 100. The Viscosity Index of synthetic oils ranges from 80 to over 400.
Calculation
The viscosity index can be calculated using the following formula:
where U is the oil's kinematic viscosity at 40 °C (104 °F), and L and H are values based on the oil's kinematic viscosity at 100 °C (212 °F). L and H are the values of viscosity at 40°C for oils of VI 0 and 100 respectively, having the same viscosity at 100°C as the oil whose VI we are trying to determine. These L and H values can be found in ASTM D2270.
References
Source of the article : Wikipedia
0 Comments