A ordinary haircut is a male and a male hairstyle that has long enough hair to comb on the top, specified or deconstructed side, and short, semi-short, medium, long, or extra long back and sides. This style is also known by other names including taper cut , regular taper cutting , side-parts and standard haircuts ; as well as the short and sideball backs , the cutting-up business and professional cuts , which are subject to different national, regional, and local interpretations of each taper for the back and sides.
Video Regular haircut
Origins
The back and the short side started from the Roman Empire, as a haircut of rules for the legion. In addition to preventing the spread of fleas, short hair and clean shaved face prevents the enemy seizing a soldier by a beard. In the first century AD, Roman hairstyles were imitated by non-Romans who admired the civilization brought by Rome. Examples include Galileans in occupied France, and inspired Jews like St. Paul try to distinguish themselves from traditionalists who are forbidden to cut hair.
The usual haircuts, worn with long beards, made a comeback during the Renaissance because of the new European appeal that men found with retrieved classical artifacts. It was revived for the second time during the Regency era c.1810-1830 because dandies left a powder wig that was impractical and expensive in response to tax powder hair William Pitt the Younger.
During Gay Nineties, ordinary haircuts gradually replace longer hair and fashionable muttonchop tasses since the 1840s until, in 1910, it has become the norm for professional men. The extreme version known as the undercut is the rule for British and German soldiers during World War I and World War II. Normal haircuts remained fashionable in America throughout the 1950s and 1960s due to its association with upscale Ivy League class fashion, and experienced a second revival among the subcultures of the early 1980s in reaction to the androgynous model of love in the 1970s. In the present, the short and short sides continue to be worn by many professional men, while the corresponding undercuts have been adapted to the hipster subculture.
Maps Regular haircut
Element
Important elements of ordinary haircuts are edging, siding and topping:
- Creeping refers to the bottom edge design of hair growth from sideburns around the ears and at the nape of the neck.
- Siding refers to the design of hair on the back and sides between the edges and the top. Creeping and taking sides, together or separately, commonly called tapering, make a point (see crew cut).
- Topping refers to the design of the hair in front and above the crown.
Crawling comes first, followed by siding and toppings. Creep is usually done with scissors; siding, cutting comb; sprinkles, scissors on the fingers. There are other methods that can be used including all cutting scissors, all pieces of scissors and all pieces of razor. The barber distinguishes between two-line haircuts and one-line haircuts. The two-line haircut is a standard tapered piece. Hair is lined around the ear and then straight down the side of the neck.
The hair growth edge at the nape of the neck is tapered to the skin with a fine cutting knife (zero). The one-line haircut, commonly referred to as a block cut, has a hair growth edge on the shaving nape outline, creating a direct transition between the hair and the skin and connecting the outline of the right sideburn to the outline of the left sideburn across the nape. The edge of the nape can be square or round. A tightened nape can have square or rounded corners. Rotary, taper, and edger clippers can be used when crawling or trimming haircuts. Protective and/or propellers can be mounted that vary the length of the pieces.
Decrease
The back is pointy and generally contoured with the shape of the head; hair grows longer than long hair on the top of the head to short hair on the lower edge of hair growth on the back and sides. There are various possibilities to shrink from short to extra length. Medium and longer slant can be called as trim; however, the word trim is usually used to request that hair be trimmed down the last haircut regardless of the taper style. Sideburns and the shape and height of the neck edge are important design elements that can affect the appearance of the face, neck, chin, ears, profile and overall style.
In many cases, the shorter neck or chin matches the somewhat higher edge of the neck; a longer neck or chin fits with a slightly lower neck edge. An extra-wide neck fits with a rather narrow neckline while a thinner neck or a protruding ear matches the wider edge of the neck. When a slightly longer sideburn is worn than appropriate for a style, it can shorten facial appearance; when the slightly shorter sideburn is worn than the right one, it can extend the appearance of the face; Therefore, the appearance of the face is shorter or longer than average, especially when because of the length of the chin or the lower face, can be normalized by changing the length of the sideburns.
Short
Other names for this taper style include full knob , tight cut , and fade . The hair on the sides and back is cut with a rough cutting knife from the bottom edge of the hair growth to or near full to the crown. Clipper gradually curved out of the hair in the hat band to reach the taper. The smooth clipper is used from the sideburn to about an inch above the ear. The clipper line is merged so there is a smooth transition between the lengths.
Sideburns, which may not be visible when the haircut depends on the color, thickness and density of the hair, the color of the skin and the fine cutting blades used, are held short between haircuts. Short sleeves extend into areas where the ear cartilage is attached to the skull or slightly lower if the ear shape requires to allow the sideburns to be defined. Can be worn with ivy league, tall and toned, flat crew cut top, butch and other styles; and often choices with these styles during the summer.
Semi-short
Also known as half crown . The hair on the sides and back is cut with a rough cutting knife about halfway up the crown; scissors start to gradually out of the hair at the top of the ear. A good cutting blade is used on the sideburns and at the nape that comes out of the hair to create a mixture at the point between the bottom and the top of the ear.
Sideburns are generally worn short as hair grows or slightly longer than short but not medium enough. Blending on the upper side can use the cutter above the comb or scissors on top of the combing technique. While a semi-short taper can be worn with regular haircuts, this is very common with ivy league, crew cuts, flat top crew pieces, butch, brush pieces, or spines.
Medium
Rough cutting blades can be used on sideburns, with scissors directly out of the hair, complementing the taper at the top of the ear. At the nape of the nape, rough scissors start protruding in the middle of the ear with a tapered finish at the top of the ear. The fine cutting knife shrinks the bottom edge of the hairline at the nape of the skin. The lower edge of hair growth at the nape can be blocked in a square or round pattern.
Sideburns are in accordance with the shape of the face is not long or short. The sideburns medium extends to the top of the ear hole. The hairs on the middle of the back and sides can be shortened, diluted and mixed using various methods including scissors on comb, scissors on comb, scissors thinning method, creeping with standard barber scissors, sliding taper or razor method. Common style with regular haircuts, pompadour leagues or ivy medium and also worn with crew or flattop pieces.
Length
A rough cutting knife is used in the nape of the nape, curling out of the hair at the bottom of the ear with a taper mounted in the middle ear. A fine cutting knife is used to shrink the edges of the hairline. A long taper is often blocked at the nape in a square or round pattern instead of tapered onto the skin. Long sleeve is suitable for average face shape. Long sleeve extends into the middle of the ear opening.
The center of the back and sides most often cut the scissors over the comb or scissors on the fingers; can also be cut with a razor. Thinning, coating, and mixing the middle of the back and sides can be done by attenuating scissors, creeping techniques or razor blades. Most often worn with regular haircuts or long pompadour.
Extra long
A rough cutting knife is used at the nape of the neck, immediately arcing out of the hair, with a taper beneath the bottom of the ear. A good cutting blade can be used to shrink the bottom edge of the hairline to the skin. An extra long taper is often blocked at the nape in a square or round pattern; deconstructed arches around the ears and dislodged or tangled blocks at the nape are also quite common.
Extra lengthy flush suit; an extra long grain extends to the top of the ear lobe. The center of the back and sides most often cut the scissors over the comb or scissors on the fingers; can also be cut with a razor. Thinning, coating, and mixing the middle of the back and sides can be done by attenuating scissors, creeping techniques or razor blades. Besides worn with regular haircuts, it is also worn with extra long pompadour.
Topping
Toppings include shortening, coating, and thinning of hair on the crown and front area to achieve the desired length, volume, contour, graduation, and layering levels. The most widely used technique to shorten, coat and smooth hair is the method of cutting a finger, also known as a finger job. The fingerwork initially involves lifting the hair to be cut with a comb, then grasping the raised hair between the index finger and middle finger of the opposite hand while moving the comb into the hand and cutting it with the scissors held in the hand that initially held the comb. The comb is then transferred back to the hand holding the scissors and the process is repeated in plots moving from front to back, outside to the inside of the upper right and left sides.
The angle at which the hair is held away from the scalp is very important because it affects how the cut hair will pass and coat. Depending on the width of the scalp and the desired haircut appearance, the angle will range from about 45 to 135 degrees. Shears over comb technique includes up and over method and shear lift method. In both methods, the cut hair is cut by a comb and cut with a pair of scissors.
The up and over method is a continuous process in which pieces of hair are cut from the front hairline to the back or from the side of the hairline upward. In the shear lifitng method, the process is not continuous but is performed sectional from left to right over the head that moves from the crown to the next. For example, there may be fifteen separate sections, three on the top of the head from side to side and five from the crown to the front. Cutting the result from the left crown to the right crown and so on forwards left to right front. As with the scissors method above the fingers, the hair corner to the scalp when cut is essential for the appearance of cut hair and pass.
Depending on the desired hair thickness and volume, topping may include depletion that can be achieved by various methods including thinning scissors, creeping with ordinary barber scissors or pushing back methods with regular scissors or scissors thinning. Thinning hair can be held with a finger or a comb. Whorls, cowlicks, and irregularities of the scalp can be overcome by a tapered shear point technique. Only a few hairs are cut in the problem area by just using the tip of the scissors, above the comb. Toppings and coatings can also be achieved with a razor-cutting technique.
Bodyguard and blades
Three types of scissors can be used to get regular haircuts: scissors, rotary scissors and outliner/edger scissors. Taper clippers are supported by linear motors or pivots. The propeller is not ready to be exchanged. The taper taper allows adjustment of cut lengths within a specified range, usually from the length of the blade # 000, 1/50 "(0.5 mm) on the smooth side for length # 1, 3/32" (2.4 mm) on the rough side. For longer lengths, the trimmer guard is installed. The guard will cut on the length of the numbered guards when the pointed lever is in the shortest cutting position. Clipper protectors are also known as guide guide inserts. Fade clippers are identical to taper clippers with the exception of long cutting ranges that are all in a good blade range. The most faded scissors cut between the blade length # 00000, 1/125 "(0.2 mm) and the blade length is # 000, 1/50" (0.5 mm). Like regular taper cutters, trimmer protectors can be fitted for longer cuts.
Rotary cutter has blades that are ready to be turned and turned off. Blades are available that leave from 1/250 "(0.1mm) to 3/4" (19mm) hairs on the scalp when the clipper is guided overhead with clipper teeth that come into contact with the scalp. The numbered bar is different from the guard. Rotary cutters are designed to accept certain types of blades, so blades of various manufacturers designed for a certain standard can be used on cutter designed for that standard, regardless of the manufacturer. The outliner/edger clipper has a very fine cutter blade and no taper taper and is used to outline clear arches around the ears and to cut blocks, edges at the back of the nape.
Bodyguard
Human scalp hair grows an average of about one inch eighth per week or one and a half inches per month. Most clipper guards are numbered in eight by one inch. The number of guards shows the number of weeks of hair growth remaining on the scalp when the clipper with a certain number guards is guided on the head with a guards in contact with the scalp. The # 1 guard leaves 1/8 inch (3 mm), one week hair growth, on the scalp; guard # 2 left 2/8 "(6.3 mm), hair growth two weeks, on scalp; guard # 3 left 3/8" (9 mm), three weeks hair growth on scalp; and so on.
Blades
Source of the article : Wikipedia
0 Comments